Presentation + Paper
9 May 2018 Multicore photonic crystal fibers for high-power laser application
Author Affiliations +
Abstract
Photonic crystal fiber (PCF) can provide both large mode area and low numerical aperture, meanwhile, offer heavy doping rate, good beam quality, and effective dispersion control. Coherent combining is an effective way to further elevate output power of a fiber laser. It is hence very beneficial to develop high-power fiber lasers using coherent combining through a multi-core PCF. In this work, by using multi-core PCF design and coherent combining technique, we studied theoretically and experimentally the multi-beam coherent combining in PCFs. We adopted a symmetrical structure to arrange multiple fiber cores, and have air holes surround them uniformly forming the cladding. Between these cores are solid glass filled. With an appropriate design of PCF structure, the coherent combining of multiple laser beams can bring higher output power up to kilowatts, while maintain good beam quality. Based on the evanescent-wave coupling theory, the modal coupling among seven cores and nineteen cores was studied. It is shown that the evanescent coupling is much stronger than the diffractive coupling if the cores are close enough. In the experiment, we fabricated rare-earth doped double-clad seven-core and nineteen-core PCFs using a stacking-capillary method. The near-field and far-field images were adopted to observe the mode coupling. Since all laser beams pass nearly the same optical length in one PCF, the phase matching can be easily realized. The theoretical and experimental results were compared, which shows that this kind of integrated multi-core PCFs can be very good candidates to achieve high-power coherent beam combining.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yong Wang, Yue-e Chen, Dewang Yang, and Bingtao Zhang "Multicore photonic crystal fibers for high-power laser application", Proc. SPIE 10681, Micro-Structured and Specialty Optical Fibres V, 106810X (9 May 2018); https://doi.org/10.1117/12.2307199
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Cladding

High power lasers

Photonic crystal fibers

Capillaries

Glasses

Doping

RELATED CONTENT

Large mode area Yb-doped photonic bandgap fiber lasers
Proceedings of SPIE (March 04 2015)
Hollow core fiber delivery of sub ps pulses from a...
Proceedings of SPIE (March 09 2015)
High power fiber laser based on a non filamented core...
Proceedings of SPIE (March 09 2016)
A numerical study of laser cooling in a large mode...
Proceedings of SPIE (January 01 1900)
The research on ytterbium doped double clad fiber for high...
Proceedings of SPIE (December 12 2018)
Novel design of M profile ytterbium doped fibers for high...
Proceedings of SPIE (November 21 2007)

Back to Top