Vacuum-assisted precision molding of 3D thin microstructure glass optics

Anh Tuan Vu; Paul-Alexander Vogel; Olaf Dambon; Fritz Klocke

doi:10.1117/12.2307060

17 May 2018 Vacuum-assisted precision molding of 3D thin microstructure glass optics

Anh Tuan Vu, Paul-Alexander Vogel, Olaf Dambon, Fritz Klocke

Proceedings Volume 10683, Fiber Lasers and Glass Photonics: Materials through Applications; 106830C (2018) https://doi.org/10.1117/12.2307060
Event: SPIE Photonics Europe, 2018, Strasbourg, France

Abstract

The continuously rising demands in the today’s photonic market towards increasing precision, high surface finish, geometrical complexity yet low cost for thin microstructure glass optics require advanced fabrication technologies. The conventional method via grinding and polishing is limited to those applications mainly due to the unavoidable deformation caused by mechanical stress between lenses and clamping parts. Over the last decade, replication technology such as thermal slumping has become an advanced method in manufacturing complex and precision thin lenses. However, the technology efficiency is strongly diminished by incomplete glass flow into mold cavity and extremely long processing time. In contrast, such deficits can be avoided by a novel molding process with vacuum assistance, recently developed at Fraunhofer IPT. The vacuum-assisted molding promises an effective and reliable technology in the fabrication of high precision thin glass optics for mass production. In this paper, the newly developed molding concept is firstly presented. Besides, this research introduces a numerical implementation based on an enhanced material model characterizing glass behavior at high temperature near softening point, which is crucial to study the internal stress, surface tension and form accuracy of the thin glass. With the help of simulation, the influences of process parameters will be discussed. Experiments were performed for the validation, and the accuracy of the molded glass with microstructure features is discussed in detail. Finally, the experiment results of both thermal slumping and vacuum-assisted molding are compared to illustrate the process efficiency and guidance for industrial applications is delivered.

Conference Presentation

Citation Download Citation

Anh Tuan Vu, Paul-Alexander Vogel, Olaf Dambon, and Fritz Klocke "Vacuum-assisted precision molding of 3D thin microstructure glass optics", Proc. SPIE 10683, Fiber Lasers and Glass Photonics: Materials through Applications, 106830C (17 May 2018); https://doi.org/10.1117/12.2307060

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available