Paper
18 December 2019 Optimization of structural parameters of sparse apertures with four rectangular sub-apertures
Zhenkun Wang, Zhicheng Zhao, Li Liu
Author Affiliations +
Proceedings Volume 11341, AOPC 2019: Space Optics, Telescopes, and Instrumentation; 1134113 (2019) https://doi.org/10.1117/12.2543683
Event: Applied Optics and Photonics China (AOPC2019), 2019, Beijing, China
Abstract
A sparse aperture consisting of four rectangular sub-apertures for deployable mirror was presented. An R-C system is designed before analysis. The pupil function and the modulation transfer function (MTF) were calculated and analyzed. The strict expression of MTF of diffraction limited system with this aperture was given. In order to solve the problem that the minimum of MTF in partial directions are close to zero when the fill factor is high, the sub-aperture configuration is optimized based on the relationship curve between MTF minimum and sub-aperture’s length-width ratio. In this paper, the MTF evaluation indexes along with calculation methods for four rectangular sub-aperture sparse aperture structure are given, including MTF average and average MTF curve. Imaging simulation of the system shows that the resolution of the unoptimized structure is low in horizontal and vertical directions, while the image quality of the optimized structure is similarly high in all directions.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhenkun Wang, Zhicheng Zhao, and Li Liu "Optimization of structural parameters of sparse apertures with four rectangular sub-apertures", Proc. SPIE 11341, AOPC 2019: Space Optics, Telescopes, and Instrumentation, 1134113 (18 December 2019); https://doi.org/10.1117/12.2543683
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Mirrors

Imaging systems

Image quality

Optical transfer functions

Computer simulations

Optics manufacturing

Back to Top