Paper
13 November 2019 Novel triangular pattern generation method for fast and accurate three-dimensional shape measurement
Author Affiliations +
Proceedings Volume 11343, Ninth International Symposium on Precision Mechanical Measurements; 113431P (2019) https://doi.org/10.1117/12.2548776
Event: International Symposium on Precision Mechanical Measurements 2019, 2019, Chongqing, China
Abstract
Three-dimensional (3D) shape measurement of fringe projection profilometry (FPP) with high speed and accuracy is required in many applications. The measurement speed of FPP system is mainly limited by the low frame rate of pattern projection. Although defocusing binary patterns can be used to increase the measurement speed greatly, it will decrease the measurement depth. To this end, a novel triangular pattern generation method is proposed in this paper. By designing and projecting binary strip patterns with focused projector, images of triangular patterns can be then acquired with high frame rate. Fast and accurate 3D shape measurement can be finally obtained by using phase-shifting triangular patterns. Compared with the traditional sinusoidal patterns, the proposed method can improve the projection rate more than 4 times. Moreover, the proposed method will not decrease the measurement depth. Experimental results are given to confirm the validity of the proposed method.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Renhao Zheng and Liandong Yu "Novel triangular pattern generation method for fast and accurate three-dimensional shape measurement", Proc. SPIE 11343, Ninth International Symposium on Precision Mechanical Measurements, 113431P (13 November 2019); https://doi.org/10.1117/12.2548776
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Binary data

Fringe analysis

3D metrology

Phase shifts

Projection systems

Phase shift keying

Composites

Back to Top