Paper
12 March 2020 Preparation of Yb3+-doped silica fiber preform at low temperature
Author Affiliations +
Abstract
We report a new method to prepare active silica fiber preform at low temperature, not exceeding 1300℃ through the whole process. We prefabricated glass parts with nano-porous structure by UV cure equipment and debinded, the average pore diameter is about 46 nm. To prepare the active fiber preform, several different concentrations of Yb3+ ions were impregnated with solution doping method and further sintering under flowed O2. After several hours vitrification, the Yb3+- doped silica fiber preform with 0.05 wt%, 0.1 wt% and 0.2 wt% doping concentration were produced, and the size of the final fiber preform is φ3×39 mm. Then the fiber owning an Yb3+ concentration of 0.1 wt% was drawn by rod-in-tube, the measurements show that Yb3+ ions are homogeneous, central wavelength is 1030 nm, the 3 dB linewidth is about 38 nm, fluorescent lifetime is 1 ms, the fiber has absorption from Yb3+ 7 dB/m at 976 nm. To best of our knowledge, it is first time that active fiber preform is produced by this approach.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Baoluo Zheng, Jinhang Wang, Yu Liu, and Pu Wang "Preparation of Yb3+-doped silica fiber preform at low temperature", Proc. SPIE 11437, 2019 International Conference on Optical Instruments and Technology: Advanced Laser Technology and Applications, 114370J (12 March 2020); https://doi.org/10.1117/12.2548808
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ytterbium

Optical fibers

Ions

Absorption

Doping

Silica

Fiber lasers

RELATED CONTENT


Back to Top