Paper
1 June 2020 Camera: LiDAR calibration using ICP-based automatic plane extraction method
Author Affiliations +
Proceedings Volume 11515, International Workshop on Advanced Imaging Technology (IWAIT) 2020; 1151530 (2020) https://doi.org/10.1117/12.2566935
Event: International Workshop on Advanced Imaging Technologies 2020 (IWAIT 2020), 2020, Yogyakarta, Indonesia
Abstract
In the autonomous driving systems, camera and LiDAR are widely used to recognize surrounding environment. For the fusion of the images and 3D point clouds, it is necessary to conduct calibration between the camera and LiDAR. The existing method utilize the checkerboards for calibration, and the corresponding planes are detected in the images and 3D point clouds of the checkerboards. The checkerboard planes in the images can be detected using the corners of grids on the checkerboard. However, the existing approach has disadvantages of manually extracting plans from 3D LiDAR point cloud to conduct calibration. Therefore, we propose method for automatically extracting planes from LiDAR point cloud using Iterative Closet Point. Also by defining new objective function for optimization, we show that the performance of calibration between the camera and LiDAR is improved in the experimental results.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seiyoul Jung, Jeyeon Kim, Hongjun Lee, Seunghyun Kim, and Whoi-Yul Kim "Camera: LiDAR calibration using ICP-based automatic plane extraction method", Proc. SPIE 11515, International Workshop on Advanced Imaging Technology (IWAIT) 2020, 1151530 (1 June 2020); https://doi.org/10.1117/12.2566935
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Clouds

Calibration

Cameras

LIDAR

3D modeling

Imaging systems

3D image processing

Back to Top