Development of advanced silver coatings for telescope mirrors

S. Schwinde; S. Shestaeva; R. Holzlöhner; G. Willers; R. Schlegel; A. Förster; R. Parra; S. Guisard; O. Sqalli; S. Schröder

doi:10.1117/12.2627710

29 August 2022 Development of advanced silver coatings for telescope mirrors

S. Schwinde, S. Shestaeva, R. Holzlöhner, G. Willers, R. Schlegel, A. Förster, R. Parra, S. Guisard, O. Sqalli, S. Schröder

Author Affiliations +

Proceedings Volume 12188, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V; 121881X (2022) https://doi.org/10.1117/12.2627710
Event: SPIE Astronomical Telescopes + Instrumentation, 2022, Montréal, Québec, Canada

Abstract

Several telescopes like VISTA or the ELT are using or will use silver coatings, replacing aluminum (Al). The advantage of silver is a higher overall reflectivity, in particular around 825 nm. Yet, silver must be protected by covering layer(s), which lowering the reflectivity in the blue/UV region. Therefore, ESO completed a 2-year development with Fraunhofer IOF under the objective of extending the wavelength range of high reflectivity to shorter wavelengths without decreasing the coating durability. The developed coatings have been examined by standardized tests like scratching sensitivity, peeling, salt mist and H₂S gas. The quasi-standard in silver coatings for telescope mirrors was developed for the Gemini observatory and it uses nickel chromium nitride (NiCrN_x) as interlayer between silver and the protective top layer(s), finished by a hard silicon nitride (Si3N4) layer of ~ 15 nm thickness. We replaced the NiCrNx by aluminium oxide (AlO_x) and it led to higher reflectivity but low durability towards the salt mist test. This test is relevant for many large telescopes because of their proximity to oceans, causing salty airborne dust. By replacing the NiCrN_xby a ruthenium-based layer and by optimizing the protection, the objective of extending the wavelength range of high reflectivity to shorter wavelengths without decreasing the coating durability could be achieved.

Conference Presentation

Citation Download Citation

S. Schwinde, S. Shestaeva, R. Holzlöhner, G. Willers, R. Schlegel, A. Förster, R. Parra, S. Guisard, O. Sqalli, and S. Schröder "Development of advanced silver coatings for telescope mirrors", Proc. SPIE 12188, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V, 121881X (29 August 2022); https://doi.org/10.1117/12.2627710

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available