Presentation + Paper
18 April 2023 Effect of heat generation in PVDF based electro-active polymer actuators
Sudarshan Kalel, Wei-Chih Wang
Author Affiliations +
Abstract
Many of the electroactive polymers are dielectric and often demand high operating voltages for actuation (<<10 MV/m). These EAP-based actuators require metallic electrode layers on the surface to apply the voltage. Due to high operating voltage, heat is produced at the surface of electrodes due to resistive heating and dielectric losses in polymer material. In the case of actuators based on active and passive layer configurations with metallic electrodes, this heat could affect the performance, as the generated heat is transferred between the layers. In the present work, a PVDF terpolymer and Kapton tape-based bilayer actuator is developed, and simulation and experimental study are carried out to check the effect of DC high voltages on heat production within layers. The contribution of this heat to the bending of the actuator is also analyzed. It is found that significant heat is generated that can affect deflection process of the EAP actuator. The total electromechanical bending deflection produced at the E-field of 20 MV/m is ~80 degrees whereas deflection due heat generated at this voltage is ~15 degrees. Hence, the total deflection produced can be claimed as a combination of thermal and electro-mechanical effects.
Conference Presentation
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sudarshan Kalel and Wei-Chih Wang "Effect of heat generation in PVDF based electro-active polymer actuators", Proc. SPIE 12485, Nano-, Bio-, Info-Tech Sensors, and Wearable Systems 2023, 124850D (18 April 2023); https://doi.org/10.1117/12.2664899
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Electroactive polymers

Thermal effects

Ferroelectric polymers

Polymeric actuators

Dielectrics

Electrodes

Back to Top