Paper
4 May 1978 Design And Implementation Of A Continuous Zoom FLIR Optical System
G. R. Noyes
Author Affiliations +
Proceedings Volume 0131, Practical Infrared Optics; (1978) https://doi.org/10.1117/12.956038
Event: 1978 Los Angeles Technical Symposium, 1978, Los Angeles, United States
Abstract
Historically, FLIRs have usually utilized single-FOV or dual-FOV optical systems. The advantages of using a zoom optical system and thereby continuously varying the FOV coverage or scene magnification are numerous. Until recently, however, infrared zoom optical systems were considered to be impractical and incapable of providing acceptable image quality unless an excessive number of optical elements were used. A mechanically compensated, parallel-scan, 5:1 continuous zoom FLIR optical system has now been designed, debugged in the prototype stage, and is in production. Although the optical design was severely restricted by the packaging requirements, only six refractive elements are used, a number that is sufficient to ensure almost diffraction-limited image quality, especially toward the shorter focal lengths of the zoom range. Since two lens surfaces are convex paraboloids, special problems had to be solved to allow manufacture in production quantities. Thermal compensation, especially in the presence of temperature transients and gradients, was effected by using an analog computer to control the motion of one lens element in order to maintain focus.
© (1978) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. R. Noyes "Design And Implementation Of A Continuous Zoom FLIR Optical System", Proc. SPIE 0131, Practical Infrared Optics, (4 May 1978); https://doi.org/10.1117/12.956038
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zoom lenses

Forward looking infrared

Mirrors

Image quality

Optical design

Tolerancing

Germanium

RELATED CONTENT


Back to Top