Paper
21 January 1993 Compensation for 6.5-K cryogenic distortion of a fused-quartz mirror by refiguring
Gordon C. Augason, Jeffrey A. Young, Ramsey K. Melugin, Dana S. Clarke, Steven D. Howard, Michael Scanlan, Steven N. Wong, Kenneth C. Lawton
Author Affiliations +
Abstract
A 46 cm diameter, lightweight, Amersil TO8E, fused-natural-quartz mirror with a single-arch cross section was tested at the NASA-Ames Research Center Cryogenic Optical Test Facility to measure its cryogenic distortion at 6.5 K. Then the mirror was refigured with the inverse of the measured cryogenic distortion to compensate for this figure defect. The mirror was retested at 6.5 K and found to have a significantly improved figure. The compensation for cryogenic distortion was not complete, but preliminary analysis indicates that the compensation was better than 0.25 waves P-V if edge effects are ignored. The feasibility of compensating for cryogenic distortion by refiguring has thus been verified.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gordon C. Augason, Jeffrey A. Young, Ramsey K. Melugin, Dana S. Clarke, Steven D. Howard, Michael Scanlan, Steven N. Wong, and Kenneth C. Lawton "Compensation for 6.5-K cryogenic distortion of a fused-quartz mirror by refiguring", Proc. SPIE 1765, Cryogenic Optical Systems and Instruments V, (21 January 1993); https://doi.org/10.1117/12.140885
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Distortion

Cryogenics

Copper

Interferometers

Sensors

Spherical lenses

Back to Top