Paper
1 January 1993 Subnanosecond optical diagnostics of laser-material interaction and dynamic microstructure of materials
Dennis L. Paisley, David B. Stahl
Author Affiliations +
Proceedings Volume 1801, 20th International Congress on High Speed Photography and Photonics; (1993) https://doi.org/10.1117/12.145717
Event: 20th International Congress on High Speed Photography and Photonics, 1992, Victoria, BC, Canada
Abstract
Several optical diagnostic techniques are used to evaluate the dynamic response of materials to intense dynamic loading and unloading, high stress and strain, and pressure. Velocity interferometry and electronic streak photography, each with sub-nanosecond time resolution, are used to record dynamic material response. Laser-launched flat plates are accelerated to 1012 m/s2 with terminal velocities > 5 km/s. By impacting these plates into target samples, high strain rates (108 sec-1) and pressures > 100 GPa have been generated for a duration of 0.8 - 5 nanoseconds. The efficacy and limitations of each technique are detailed and applications to other fields discussed.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dennis L. Paisley and David B. Stahl "Subnanosecond optical diagnostics of laser-material interaction and dynamic microstructure of materials", Proc. SPIE 1801, 20th International Congress on High Speed Photography and Photonics, (1 January 1993); https://doi.org/10.1117/12.145717
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temporal resolution

High speed photography

Photonics

Streak cameras

Polymethylmethacrylate

Interferometry

Optical diagnostics

RELATED CONTENT

Theoretical Analysis Of Synchroscan Streak Camera
Proceedings of SPIE (June 07 1989)
Eg&G, Inc., Fast Streak Camera Operation
Proceedings of SPIE (February 01 1989)
492-MHz circular-scan streak camera
Proceedings of SPIE (January 01 1993)

Back to Top