Paper
12 November 1993 Critical heat flux of subcooled flow boiling with water for high heat flux application
Fujio Inasaka, Hideki Nariai
Author Affiliations +
Abstract
Subcooled flow boiling in water is thought to be advantageous in removing high heat load of more than 10 MW/m2. Characteristics of the critical heat flux (CHF), which determines the upper limit of heat removal, are very important for the design of cooling systems. In this paper, studies on subcooled flow boiling CHF, which have been conducted by the authors, are reported. Experiments were conducted using direct current heating of stainless steel tube. For uniform heating conditions, CHF increment in small diameter tubes (1 - 3 mm inside diameter) and the CHF characteristics in tubes with internal twisted tapes were investigated, and also the existing CHF correlations for ordinary tubes (more than 3 mm inside diameter) were evaluated. For peripherally non-uniform heating conditions using the tube, whose wall thickness was partly reduced, the CHF for swirl flow was higher than the CHF under uniform heating conditions with an increase of the non-uniformity factor.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fujio Inasaka and Hideki Nariai "Critical heat flux of subcooled flow boiling with water for high heat flux application", Proc. SPIE 1997, High Heat Flux Engineering II, (12 November 1993); https://doi.org/10.1117/12.163810
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Heat flux

Thermal engineering

Data modeling

Protactinium

Astatine

Cooling systems

Liquids

RELATED CONTENT

Local subcooled flow boiling model assessment and development
Proceedings of SPIE (November 12 1993)
R12 freon condensation in micro and nano channels of...
Proceedings of SPIE (November 01 2012)
Comparison of high heat flux cooling applications
Proceedings of SPIE (February 25 1993)
Moisture survey in building
Proceedings of SPIE (April 18 2006)

Back to Top