Paper
12 November 1993 Preliminary thermo-mechanical analysis of the second-phase photon shutters for insertion device beamline front ends at the Advanced Photon Source
H. L. Thomas Nian, I. C. Albert Sheng, Tuncer M. Kuzay
Author Affiliations +
Abstract
The photon shutters (PS) on the insertion device front end of the beamlines at the Advanced Photon Source (APS) are designed to fully intercept powerful 7-GeV undulator radiation. Traditional materials (oxygen-free copper and Glidcop) are used in their construction. The heat flux from the undulators is enormous. For example, in the later phase of the project, the first photon shutter (PS1) placed at a distance of 17 m from the Undulator A source is subjected to 1400 W/mm2 at normal incidence with a total power of 11.4 kW. Our analysis of PS1 indicates that the face plate made of either graphite or beryllium retains its integrity in most of the cases. The maximum effective stress of the absorber plate (made of annealed OFHC) exceeds the yield strength (50 MPa) except in the case of an absorber with a 10-mm graphite face plate.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. L. Thomas Nian, I. C. Albert Sheng, and Tuncer M. Kuzay "Preliminary thermo-mechanical analysis of the second-phase photon shutters for insertion device beamline front ends at the Advanced Photon Source", Proc. SPIE 1997, High Heat Flux Engineering II, (12 November 1993); https://doi.org/10.1117/12.163815
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Beryllium

Interfaces

Heat flux

Camera shutters

X-rays

Thermal engineering

Picosecond phenomena

RELATED CONTENT

Helium-cooled divertor module for fusion devices
Proceedings of SPIE (November 12 1993)
Beryllium window for an APS diagnostics beamline
Proceedings of SPIE (December 11 1997)
Some closed form solutions of the temperature field due to...
Proceedings of SPIE (November 12 1993)
Design of a new coaxial water-cooled photon shutter
Proceedings of SPIE (November 12 1993)
Thermal analysis of the crotch absorber in APS
Proceedings of SPIE (February 25 1993)

Back to Top