Paper
28 July 1994 Sol-gel coatings for high-power laser optics: past, present and future
Ian M. Thomas
Author Affiliations +
Abstract
An investigation into the preparation of sol-gel coatings for high power lasers was started at LLNL in 1983 and AR coatings were successfully developed for use in the Nova laser in 1984. Several other large lasers now use these coatings. Subsequent work on HR coatings resulted in AlOOH/SiO2 and later ZrO2 or HfO2/SiO2 systems of good optical performance. The use of organic polymer binders gave increased damage threshold and enhanced optical performance. We are in the process of scaling up HR fabrication for substrates approximately 38 cm square. Concurrently we are developing sol-gel random phase plates for laser beam smoothing. These have a patterned surface design of silica which induces phase shifts in the beam by variation in the optical path length. Plates of this type on 80 cm diameter substrates have been used successfully on the Nova.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ian M. Thomas "Sol-gel coatings for high-power laser optics: past, present and future", Proc. SPIE 2114, Laser-Induced Damage in Optical Materials: 1993, (28 July 1994); https://doi.org/10.1117/12.180884
Lens.org Logo
CITATIONS
Cited by 28 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silica

Optical coatings

Laser damage threshold

Sol-gels

Antireflective coatings

Oxides

High power lasers

Back to Top