Paper
1 May 1994 Fiber sensors for control and health monitoring system for mining machinery
Richard O. Claus, Michael F. Gunther, Jonathan A. Greene, Tuan A. Tran, Kent A. Murphy
Author Affiliations +
Abstract
This paper describes initial results of a fiber optic-based sensor during on-site testing performed by FEORC and Fiber and Sensor Technologies at Ingersol-Rand. Advantages of the fiber optic sensor are a demonstrated enhanced survivability, higher sensitivity, smaller size, electromagnetic interference immunity, and reduced risk of explosion. The conventional wire strain gages typically survive only a few minutes attached to the drill steel and drive chain, while the fiber sensors described here have survived over 400 hours and are currently still functioning properly. The tests described include the demonstration of strain energy measurements on the drive chain and drill steel, and displacement measurements of the piston within the drifter. All of the sensors tested can be used as both a laboratory evaluation and testing tools, as well as being an integral part of a proposed control and health monitoring system.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard O. Claus, Michael F. Gunther, Jonathan A. Greene, Tuan A. Tran, and Kent A. Murphy "Fiber sensors for control and health monitoring system for mining machinery", Proc. SPIE 2191, Smart Structures and Materials 1994: Smart Sensing, Processing, and Instrumentation, (1 May 1994); https://doi.org/10.1117/12.173972
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber optics sensors

Control systems

Interfaces

Mining

Fiber optics

Fiber optics tests

RELATED CONTENT

Fiber optic sensor for flow and viscosity measurement
Proceedings of SPIE (April 01 2016)
HT HP x tree and down hole fiber optic connectors...
Proceedings of SPIE (December 14 2004)
Use of fiber optic based flow cells and probes in...
Proceedings of SPIE (August 14 1992)
Microbending Fiber Optic Sensing
Proceedings of SPIE (September 19 1983)
Implementation of fiber optic technology in flight controls
Proceedings of SPIE (February 09 1993)
Fiber optic smart structures for fly-by-light
Proceedings of SPIE (October 04 1994)

Back to Top