Paper
15 September 1995 Design and analysis of a spaceborne lidar telescope
Author Affiliations +
Abstract
A spaceborne telescope has been designed and analyzed for a 2-micron solid state coherent lidar system operating on a satellite. The optical system consists of a large off-axis reflective telescope, a large-aperture diffractive scanner, an image derotator and a lag angle compensator. Due to the orbiting motion of the satellite and scanning, the boresight of the telescope shifts during the round trip travel time of the laser pulses to the target. In a coherent lidar system utilizing optical heterodyne detection, the relative alignment of the received signal with respect to the local oscillator beam is particularly critical. Two compensators have been designed to correct the boresight errors as well as the wavefront errors caused by beam wandering due to the boresight changes. Several design approaches for the compensators have been investigated. The optical and optomechanical design issues for such a system are discussed. The results of optical performance, modeling, and tolerance analysis for the telescope are also presented.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chen Feng, Anees Ahmad, and Farzin Amzajerdian "Design and analysis of a spaceborne lidar telescope", Proc. SPIE 2540, Current Developments in Optical Design and Engineering V, (15 September 1995); https://doi.org/10.1117/12.219534
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Space telescopes

Telescopes

LIDAR

Mirrors

Scanners

Optical design

Optical instrument design

RELATED CONTENT

Turkey's next big science project DAG the 4 meter...
Proceedings of SPIE (July 22 2014)
Design and end-to-end modelling of a deployable telescope
Proceedings of SPIE (September 25 2017)
Optical design of an off-axis low-distortion UV telescope
Proceedings of SPIE (September 01 1991)
Design and fabrication of a compact lidar telescope
Proceedings of SPIE (November 21 1996)
Optical design of the EPIC-IM crossed Dragone telescope
Proceedings of SPIE (August 05 2010)

Back to Top