Paper
31 March 1997 High-average-power picosecond-pulse excimer laser system for x-ray generation
Michael F. Powers, Harry Shields
Author Affiliations +
Abstract
A high average power, picosecond pulse XeCl excimer laser system has been demonstrated. By using spatial filtering of the XeCl preamplifier, and by forming pulse bursts of 16 pulses with 2-ns pulse spacing, amplified spontaneous emission has been successfully suppressed in the output of the final amplifier stage. On average, each pulse in the burst is amplified to a level of 15 mJ, corresponding to approximately twice the saturation fluence for XeCl. Peak power in the picosecond pulses is 1.5 GW at 10 ps pulse duration, and the average power of the system is 68 W at 300 Hz burst repetition rate. These pulse bursts have been focused on a copper tape target to generate a laser-produced plasma which emits an x-ray power of 2 W into 2(pi) steradian solid angle, in a spectral band from 9-13 angstrom.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael F. Powers and Harry Shields "High-average-power picosecond-pulse excimer laser system for x-ray generation", Proc. SPIE 2992, Excimer Lasers, Optics, and Applications, (31 March 1997); https://doi.org/10.1117/12.270098
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Picosecond phenomena

X-rays

Excimer lasers

Pulsed laser operation

Oscillators

Laser systems engineering

Optical amplifiers

RELATED CONTENT

ELI-Beamlines laser systems: status and design options
Proceedings of SPIE (May 07 2013)
A single 40 ps pulse generated in a quenched dye...
Proceedings of SPIE (September 01 1996)
Femtosecond Excimer Lasers
Proceedings of SPIE (April 26 1989)
New opportunities with intense ultra-short-pulse lasers
Proceedings of SPIE (July 01 1991)
A Picosecond High Power KrF Laser System
Proceedings of SPIE (October 21 1986)

Back to Top