Wide-bandwidth silicon nitride membrane microphones

Brian T. Cunningham; Jonathan J. Bernstein

doi:10.1117/12.284500

5 September 1997 Wide-bandwidth silicon nitride membrane microphones

Brian T. Cunningham, Jonathan J. Bernstein

Proceedings Volume 3223, Micromachining and Microfabrication Process Technology III; (1997) https://doi.org/10.1117/12.284500
Event: Micromachining and Microfabrication, 1997, Austin, TX, United States

Abstract

Small, low cost microphones with high sensitivity at frequencies greater than 20 KHz are desired for applications such as ultrasonic imaging and communication links. To minimize stray capacitance between the microphone and its amplifier circuit, process compatibility between the microphone and on-chip circuitry is also desired to facilitate integration. In this work, we have demonstrated micromachined microphones packaged with hybrid JFET amplifier circuitry with frequency response extending to 100 KHz, and voltage sensitivity of approximately 2.0 mV/Pa from 100 Hz to 10 KHz, and 16.5 mV/Pa at 30 KHz with a bias voltage of 8.0 V. The microphones are fabricated with membranes and fixed backplates made of low temperature plasma-enhanced chemical vapor deposited (PECVD) silicon nitride. Because the maximum temperature of the fabrication process is 300 degrees Celsius, microphones may be built on silicon wafers from any commercial CMOS foundry without affecting transistor characteristics, allowing integration with sophisticated amplifier circuitry. Low stress silicon nitride deposition was used to produce membranes up to 2.0 mm diameter and 0.5 micrometer thickness with plus or minus 0.10 micrometer flatness. The excellent planarity of both the diaphragm and the backplate, combined with a narrow sense gap (approximately 2 micrometers) results in high output capacitance (up to 6.0 pF). The high output capacitance results in noise spectral density which is approximately 3x lower than silicon diaphragms microphones previously fabricated by the authors. Diaphragms with corrugations were fabricated to relive tensile stress, to increase deflection per unit pressure and to increase deflection linearity with pressure.

Citation Download Citation

Brian T. Cunningham and Jonathan J. Bernstein "Wide-bandwidth silicon nitride membrane microphones", Proc. SPIE 3223, Micromachining and Microfabrication Process Technology III, (5 September 1997); https://doi.org/10.1117/12.284500

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available