Paper
18 June 1998 Holographic recording properties in thick films of ULSH-500 photopolymer
David A. Waldman, H.-Y. S. Li, Erdem A. Cetin
Author Affiliations +
Abstract
The photopolymer holographic recording materials, ULSH-500, based upon cationic ring-opening polymerization, has been further optimized for recording in an increased film thickness of 200 micrometers . The dynamic range attained, at least M/# equals 16, is substantially greater than previously reported, while concurrently the inherent low transverse shrinkage and high sensitivity characteristics of the material have been retained. Dynamic range or cumulative grating strength, (Sigma) (eta) i0.5, has been determined from co-locationally recorded peristrophic and angle multiplexed plane-wave gratings which exhibit low diffraction efficiencies between about 0.1 and 0.2%. Good Bragg selectivity consistent with the imaged thickness and sinc2 function behavior is observed for the multiplexed holograms, and both the angular response and the diffraction efficiency are stable without the need for post-imaging fixing procedures. Sensitivity is in the range of 1 to 10 cm/mJ, and the refractive index modulation achievable during consumption of the accessible dynamic range is n1 equals 1.3 X 10-2 at the read wavelength of 514.5 nm.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David A. Waldman, H.-Y. S. Li, and Erdem A. Cetin "Holographic recording properties in thick films of ULSH-500 photopolymer", Proc. SPIE 3291, Diffractive and Holographic Device Technologies and Applications V, (18 June 1998); https://doi.org/10.1117/12.310591
Lens.org Logo
CITATIONS
Cited by 21 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Holograms

Multiplexing

Diffraction

Diffraction gratings

Holography

Refractive index

Argon ion lasers

Back to Top