Paper
1 September 1998 Development of a high-performance e-beam resist suitable for advanced mask fabrication
Kazutaka Tamura, H. Niwa, S. Kanetsuki, M. Asano, S. Mitamura, Daichi Okuno, Masa-aki Kurihara, Naoya Hayashi
Author Affiliations +
Abstract
We developed a new positive E-beam resist, 'ERB'-900 MX for fabrication of advanced masks for the next generation. 'ERB'-900 MX is a non-chemically amplified resist based on novolak and naphthoquinonediazide. A newly designed additive and modification of the novolak resin contributed to improvement of sensitivity and resolution. There are two types of 'ERB'-900 MX, 'ERB'-900 MX(alpha) and MX(beta) whose solvents are different. Most important feature of 'ERB'-900 MX is highly sensitive. Especially, 'ERB'-900 MX(beta) showed excellent sensitivity of 3.5 (mu) C/cm2 at 20 keV and 12 (mu) C/cm2 at 50 keV. Stability of 'ERB'-900 MX after EB exposure was quite good. No practical change in sensitivity was observed for 12 hours in air and in vacuum. CD linearity of 'ERB'-900 MX(alpha) was around 0.75 micrometers for isolated patterns. CD bias for dry-etch process of 'ERB'-900 MX(alpha) is around 0.1micrometers which is comparable to that of 'ERB'-900 M-1. We confirmed that 'ERB'-900 MX has excellent performance suitable for fabrication of advanced masks.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kazutaka Tamura, H. Niwa, S. Kanetsuki, M. Asano, S. Mitamura, Daichi Okuno, Masa-aki Kurihara, and Naoya Hayashi "Development of a high-performance e-beam resist suitable for advanced mask fabrication", Proc. SPIE 3412, Photomask and X-Ray Mask Technology V, (1 September 1998); https://doi.org/10.1117/12.328813
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mask making

Critical dimension metrology

Photomasks

Photoresist processing

X-ray technology

Additive manufacturing

Phase shifts

RELATED CONTENT

Newly developed mask observation SEM JWS-7800
Proceedings of SPIE (November 03 1994)
New photomask patterning method based on KrF stepper
Proceedings of SPIE (July 30 2002)
Masks for 0.25-um lithography
Proceedings of SPIE (November 03 1994)
Possibility of a spin cup method
Proceedings of SPIE (September 01 1998)

Back to Top