Paper
19 June 1998 Highly accurate fiber Bragg grating strain- sensing system
Tsung-hsuan Chiu, Ming-The Chang, Chung Ho Hsia
Author Affiliations +
Proceedings Volume 3420, Optical Fiber Communication; (1998) https://doi.org/10.1117/12.312851
Event: Asia Pacific Symposium on Optoelectronics '98, 1998, Taipei, Taiwan
Abstract
Fiber grating sensors are widely used in the strain measurements for smart structures such as composite materials, bridges, aircraft, etc. In this paper, three successful approaches implemented to improve the accuracy for the fiber Bragg grating (FBG) strain sensing system are described and followed by experimental results. Firstly, two reference FBGs and a specific algorithm are used for the automatic calibration function. Secondly, the newly developed amplified spontaneous emission light source using Erbium-doped fiber was adopted to eliminate the wavelength reading error caused by the ripple. Thirdly, the pair sensors formed by two FBGs with different reflected wavelength were designed to simultaneously measure the temperature and strain of the structure. The strain reading variation of the sensing system is found to be 3.3 (mu) (epsilon) .
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tsung-hsuan Chiu, Ming-The Chang, and Chung Ho Hsia "Highly accurate fiber Bragg grating strain- sensing system", Proc. SPIE 3420, Optical Fiber Communication, (19 June 1998); https://doi.org/10.1117/12.312851
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Sensors

Calibration

Sensing systems

Temperature metrology

Light sources

Signal detection

Back to Top