Paper
30 October 1998 Common-path heterodyne interferometer with automatic focusing system for online surface profiling
Rong Liang, Dacheng Li, Mang Cao, Hongzhi Zhao, Yong-jun Wu
Author Affiliations +
Abstract
A common-path heterodyne interferometer for on-line non- contact measurement of surface profile has been developed. A single-mode frequency-stabilized laser diode (780 nm) serves as the light source to make whole system compact (total volume 250L X 200W X 100Dmm). The optical common-path configuration remarkably minimizes the effects caused by vibration, air turbulence and other environmental variations. Multiperiodical phase measuring technique, which is based on the combination of fractional periodic phase measurement and integer periodic phase counting, is employed in signal processing, so the system features not only high vertical resolution but wide measuring range as well. In addition, the automatic focusing system greatly facilitates the measurement especially on-line profiling. This paper gives the brief principles, the arrangement of the interferometer and some test results. The system has vertical resolution of 0.39 nm and lateral resolution of 0.73 micrometer. The stability is 1.95 nm (3(sigma) ) during about 1 hour and the accuracy of automatic focusing system is 0.1 micrometer within plus or minus 25 micrometer of the focus.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rong Liang, Dacheng Li, Mang Cao, Hongzhi Zhao, and Yong-jun Wu "Common-path heterodyne interferometer with automatic focusing system for online surface profiling", Proc. SPIE 3426, Scattering and Surface Roughness II, (30 October 1998); https://doi.org/10.1117/12.328470
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Phase measurement

Heterodyning

Profiling

Optical testing

Signal detection

Beam splitters

Back to Top