Paper
13 August 1998 Properties of 3X3 fused-taper Hi-Bi optical fiber couplers and their application
Rongsheng Chen, Qin Geng Li, Qing Cai, Jianwei Guo, Guosheng Wei
Author Affiliations +
Abstract
As we know, 2 X 2 fused taper Hi-Bi optical fiber couplers are used in many interferometric optical fiber sensor such as FOG, Michelson optical fiber interferometer and Mach-Zehnder optical fiber interferometer. In this paper, the fabrication of 3 X 3 fused taper Hi-Bi optical fiber couplers and their properties and application are discussed. The method for identifying and aligning the birefringent axes of the fibers forming coupler are described. The insertion los of couplers we fabricated is about 1.0-1.5dB. The splitting is about 1:0:1-1:1:1. The extinction ratio is about 15-20dB. We have tested some interferometer system and give some results. The wavelength of light is 1.3micrometers .
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rongsheng Chen, Qin Geng Li, Qing Cai, Jianwei Guo, and Guosheng Wei "Properties of 3X3 fused-taper Hi-Bi optical fiber couplers and their application", Proc. SPIE 3555, Optical and Fiber Optic Sensor Systems, (13 August 1998); https://doi.org/10.1117/12.318157
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Fiber couplers

Fiber optic gyroscopes

Interferometers

Phase modulation

Refractive index

Sensors

Back to Top