Paper
6 September 1999 New statistical approach for design optimization and performance assessment of spaceborne optical systems
Lionel Perret, David Laubier, Vincent Albouys
Author Affiliations +
Abstract
The spot follow-on system is anew CNES Earth Observation program with reduced development cost as a major objective. In order to reach this goal, new methods for design optimization and performances assessment will have to be taken into account, with the aim to decreasing costly design safety margins. Present paper describes an original approach for rational assessment of image quality of spaceborne observation optical systems. This approach is based upon an overall end to end thermal, mechanical, optical modelization of the instrument which is submitted to both ground operations and space environment. Potential presence of ground and/or on-board active control loops can also be taken into account in that global chain. Based on this approach, a simulation tool has been developed, which allows statistical evaluation of the optical performance expressed as the RMS wave front error (WFE) using the Monte-Carlo method. Instrument modulation transfer function statistical budgets, including detector convolution effect, can be finally obtained as a simple post-processing of preceding WFE calculation step. Validation results and application to the 3S TMA instrument will be presented.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lionel Perret, David Laubier, and Vincent Albouys "New statistical approach for design optimization and performance assessment of spaceborne optical systems", Proc. SPIE 3739, Optical Fabrication and Testing, (6 September 1999); https://doi.org/10.1117/12.360174
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Modulation transfer functions

Telescopes

Wavefronts

Optical components

Error analysis

Manufacturing

RELATED CONTENT


Back to Top