Paper
14 January 2000 Position sensing system using laser for curved tunneling
Hiroshi Asada, Shoji Inoue, Toshiro Yamada
Author Affiliations +
Proceedings Volume 3887, High-Power Lasers in Civil Engineering and Architecture; (2000) https://doi.org/10.1117/12.375197
Event: Advanced High-Power Lasers and Applications, 1999, Osaka, Japan
Abstract
Curved micro-tunneling using small conduit pipes with diameters of 1m or less is recently applied in many construction sites. We have come up with a new position sensing system to pinpoint the head of the first pipe even when it cannot be seen directly from the base position. It differs from the traditional method of using the collimated laser beam, in that a diode laser with a large divergence is used as the point source of light. The direction of the point source of light is detected by using an objective lens and CCD camera. To apply this method to the position detection of the first pipe, the structure of the sensing unit and its detection accuracy were examined and the following result were obtained. (1) The structure using a polarized beam splitter can suppress error led by rotating the sensing unit. (2) Through simulation and some field test, 20 seconds or less detection accuracy of direction angle was achieved.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroshi Asada, Shoji Inoue, and Toshiro Yamada "Position sensing system using laser for curved tunneling", Proc. SPIE 3887, High-Power Lasers in Civil Engineering and Architecture, (14 January 2000); https://doi.org/10.1117/12.375197
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser development

Metals

Laser welding

Manufacturing

Chromium

Corrosion

Hydrogen fluoride lasers

RELATED CONTENT

Strategic directions of laser technologies development
Proceedings of SPIE (January 20 1999)
Flatness floor system by caterpillar rail
Proceedings of SPIE (January 14 2000)
Economic Justification Of Industrial Laser Applications
Proceedings of SPIE (September 30 1985)
Latest developments in laser manufacturing
Proceedings of SPIE (September 07 1994)
The story of laser brazing technology
Proceedings of SPIE (January 30 2012)
The state-of-the-art laser bio-cladding technology
Proceedings of SPIE (November 16 2010)

Back to Top