Paper
22 August 2000 Modeling considerations for imaging with a standard metal detector
Author Affiliations +
Abstract
A standard pulsed induction metal. detector is used to image buried metallic objects by scanning an area of interest. It is shown that, under specific hypotheses, the output image is the result of the convolution of a target function with a kernel depending on the incident magnetic field. Several hypotheses are considered, leading to different kernel shapes and different interpretations of the target function. As the detector imaging function is a low-pass filter, shape's details spread out and the resulting raw image are blurred, Since a high-pass restoration filter must be used to deconvolve the raw images, care must be taken to avoid a strong amplification of noise. The imaging filter is computed using a numerical simulation of the incident magnetic field. Finally, the restoration filter is computed using the Wiener approach. Results are shown for a couple of metallic pieces.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pascal Druyts, Lionel Merlat, and Marc P. J. Acheroy "Modeling considerations for imaging with a standard metal detector", Proc. SPIE 4038, Detection and Remediation Technologies for Mines and Minelike Targets V, (22 August 2000); https://doi.org/10.1117/12.396231
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Magnetism

Metals

Target detection

Image restoration

Image filtering

Magnetic sensors

Back to Top