Paper
16 August 2001 Microgyroscopes with dynamic disturbance rejection
Author Affiliations +
Abstract
This paper reports a novel micromachined gyroscope design with inherent disturbance-rejection capabilities. The proposed approach is based on increasing the degrees-of-freedom (DOF) of the oscillatory system by the use of two independently oscillating proof masses. Utilizing dynamical amplification in the 4-DOF system, inherent disturbance rejection is achieved, providing reduced sensitivity to structural and thermal parameter fluctuations and damping changes over the operating time of the device. In the proposed system, the first mass is forced to oscillate in the drive direction, and the response of the second mass in the orthogonal direction is sensed. The response has two resonant peaks and a flat region between peaks. Operation is in the flat region, where the gain is insensitive to frequency fluctuations. Simulations indicate over 15 times increase in the bandwidth of the system due to the use of the proposed architecture. In addition, the gain in the operation region has low sensitivity to damping changes. Consequently, by utilizing the disturbance-rejection capability of the dynamical system, improved robustness is achieved, which can relax tight fabrication tolerances and packaging requirements and thus result in reducing production cost of micromachined gyroscopes.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Cenk Acar and Andrei M. Shkel "Microgyroscopes with dynamic disturbance rejection", Proc. SPIE 4334, Smart Structures and Materials 2001: Smart Electronics and MEMS, (16 August 2001); https://doi.org/10.1117/12.436590
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Gyroscopes

Dynamical systems

Capacitors

Finite element methods

Temperature metrology

Microelectromechanical systems

Control systems

Back to Top