Paper
23 March 2001 Uses and requirements for thermal imaging in the television glass industry
Author Affiliations +
Abstract
Over the last 55 years, direct-view televisions have evolved from small black-and-white models to large, color models. Screen area has increased thirty-fold, requiring thicker glass to support the high vacuum load in the picture tube. The largest tubes now require more than 140 lbs. (65 kg) of glass, and are more than 1 inch (2.5 cm) thick in the screen area. These newer, larger televisions must support high- resolution digital signals, with much tighter requirements for screen inside contour and image quality. Manufacturing these large, thick, high-quality screens on old production lines is very challenging. This paper describes some of the ways that thermal imaging is used to meet these challenges. Some uses are simple, such as predictive maintenance inspections common in many factories. Other uses are more complex, such as evaluating metal wear in press equipment and providing data to validate complex models of glass forming. This paper also explores some of the special requirements placed on thermal imaging equipment in a television glass plant. Among other things, these include high operating and ambient temperatures (greater than 1000 degrees C) and the ability to measure temperatures in both highly reflective and semi-transparent materials.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joseph Heer "Uses and requirements for thermal imaging in the television glass industry", Proc. SPIE 4360, Thermosense XXIII, (23 March 2001); https://doi.org/10.1117/12.420979
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Thermography

Televisions

Reflection

Temperature metrology

Data modeling

Metals

Back to Top