Paper
7 June 2002 Analog and digital transmission using high-power fiber amplifiers
Puneit Dua, K. Lu, Niloy K. Dutta, James Jacques
Author Affiliations +
Abstract
Fiber optic based CATV distribution systems may need very high powers prior to distribution. High optical powers can be obtained using a cladding pumped fiber amplifier. The performance of an analog transmission system using a high power cladding pumped fiber amplifier has been investigated. Analog signals from a 120-channel CATV signal generator was used to directly modulate 1550 nm distributed feed back laser. The output was amplified to ~1W using a cladding pumped fiber amplifier. The carrier to noise ratio (CNR), composite second order (CSO) and composite triple beat (CTB) of the composite analog signals were measured before and after amplification. No significant change in CNR, CSO and CTB signals were observed which suggests that the amplifier does not introduce any additional non-linearity. Similar experiment was also carried out using a hybrid digital/analog system where the carrier at 223.25 MHz was modulated at 2Mb/s using the BPSK modulation format. Bit error rate (BER) of <10-9 was obtained for a modulation depth of 2.8% of the BPSK modulated channel. No significant changes in CNR, CSO and CTB were observed for this mixed mode transmission after amplification.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Puneit Dua, K. Lu, Niloy K. Dutta, and James Jacques "Analog and digital transmission using high-power fiber amplifiers", Proc. SPIE 4653, WDM and Photonic Switching Devices for Network Applications III, (7 June 2002); https://doi.org/10.1117/12.469640
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation

Analog electronics

Fiber amplifiers

Optical amplifiers

Distortion

Composites

Receivers

RELATED CONTENT

High Signal To Noise Operation Of Fiber Optic Links To...
Proceedings of SPIE (January 17 1989)
Linearized external modulator for analog applications
Proceedings of SPIE (February 01 1991)
Systematic approach to peak-to-average power ratio in OFDM
Proceedings of SPIE (November 20 2001)
Relevant EDFA features for CATV applications
Proceedings of SPIE (March 23 1993)

Back to Top