Paper
21 May 1984 High Resolution Polymer Pattern Fabrications With Low Energy Proton Beams
H. Hiraoka
Author Affiliations +
Abstract
Low energy protons in several keV energy range have very limited penetration depths into polymer films. This necessitates uses of very thin oxygen etch barrier layers and of dry image developments in oxygen reactive ion etching. For negative tone images the etch barrier layers were deposited patternwise in proton beam induced polymerizations of organo-metallic compounds, followed by dry image developments in oxygen reactive ion etching. For positive tone images the etch barrier layers were deposited prior to patternwise exposures to proton beams on top of polymer films by plasma polymerizations of organo-metallic compounds, or by evaporation or sputtering of certain metals. Hydrogen atoms and/or protons react with metal atoms in the etch barrier layers to yield volatile metal hydrides, making the exposed areas more vulnerable to oxygen reactive ion etching, and providing positive tone images after image developments. In these processes almost any kind of carbonaceous polymer films can be used as imaged materials. With a bright ion source available the exposure times could be less than a second, yielding high aspect ratio and high resolution polymer patterns.
© (1984) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. Hiraoka "High Resolution Polymer Pattern Fabrications With Low Energy Proton Beams", Proc. SPIE 0469, Advances in Resist Technology I, (21 May 1984); https://doi.org/10.1117/12.941786
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Reactive ion etching

Oxygen

Polymer thin films

Etching

Plasma

Hydrogen

Back to Top