Paper
27 June 2002 Dynamically tuned shroud for gun barrel vibration attenuation
Andrew G. Littlefield, Eric L. Kathe, Robert Durocher
Author Affiliations +
Abstract
Modern tank guns, such as the one on the Abrams, are stabilized to allow fire on the move while traversing uneven terrain. The current barrel is short enough that treating as a rigid beam allows engagement of another tank at ranges of over a kilometer. However, as the length of the tube is extended, to meet required muzzle exit velocities, the terrain induced vibrations lead to increased muzzle pointing errors. A method to reduce these vibrations is to use the forward thermal shroud as part of a mass tuned damper. In this case the system under study is an extended length version of the gun currently fielded. This extended length increases its susceptibility to terrain-induced vibrations. The forward thermal shroud has been shortened and additional mass has been added onto its forward collar. This collar is then supported by springs, which are preloaded so that they stay in contact through the full range of the shroud's movement. Varying the stiffness of these springs allows for tuning of the absorber. Different types of springs and attachments have been tried. The current version uses leaf springs and a wedge collar. This system has been modeled and experiments conducted to validate the model.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew G. Littlefield, Eric L. Kathe, and Robert Durocher "Dynamically tuned shroud for gun barrel vibration attenuation", Proc. SPIE 4697, Smart Structures and Materials 2002: Damping and Isolation, (27 June 2002); https://doi.org/10.1117/12.472645
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
MATLAB

Data modeling

Modal analysis

Signal attenuation

Motion models

Finite element methods

Optical fabrication

Back to Top