Feasibility study of PZT thin-film sensors and actuators for smart microstructures and MEMS devices

Yi-Chu Hsu; I. Y. Shen; G. Z. Cao

doi:10.1117/12.474676

15 July 2002 Feasibility study of PZT thin-film sensors and actuators for smart microstructures and MEMS devices

Yi-Chu Hsu, I. Y. Shen, G. Z. Cao

Proceedings Volume 4701, Smart Structures and Materials 2002: Smart Structures and Integrated Systems; (2002) https://doi.org/10.1117/12.474676
Event: SPIE's 9th Annual International Symposium on Smart Structures and Materials, 2002, San Diego, California, United States

Abstract

This paper demonstrates the feasibility of using PZT thin films as sensors and actuators for smart structures and MEMS applications. The feasibility study includes specimen preparation and vibration testing. The specimen consists of a substrate, a PZT thin film, and a bulk PZT. The substrate is a doped conductive silicon wafer. The PZT thin film is fabricated through sol-gel dip-coating process with added PZT nano-particles to prevent homogeneous crystallization. The thickness of the PZT thin film is about 5 micrometers and the capacitance varies from 90 to 130 pF. The bulk PZT, which is commercially available, serves as a reference sensor and actuator for the specimen. The dimensions of the specimen are 2.7 cmx 1.4 cm . 0.4 mm. The vibration testing consists of sensor testing and actuator testing. In the sensor testing, the PZT thin film serves as a sensor, while the bulk PZT serves as an actuator. The specimen is cantilevered, and harmonic excitations are generated from 500 Hz to 500 kHz. A laser Doppler vibrometer also monitors the specimen vibration in addition to the PZT thin-film sensor. As a sensor, the PZT thin film produces legible harmonic output voltage ranging from 0.5 mV to 200 mV. In the actuator testing, the PZT thin film serves as an actuator, while the bulk PZT serves as a sensor. Similarly, harmonic excitations are generated from 100 Hz to 1 MHz. Depending on the excitation frequency, actuation voltage of the PZT thin film ranging from 0.1V to 100 V results in legible voltage response form the bulk PZT. Also, the PZT thin film experiences significant aging when it serves as an actuator. This might result from fatigue or accumulated defects of the PZT thin film. Finally, the PZT thin film can become nonlinear in sensing and actuation, when the excitation voltage is too high.

Citation Download Citation

Yi-Chu Hsu, I. Y. Shen, and G. Z. Cao "Feasibility study of PZT thin-film sensors and actuators for smart microstructures and MEMS devices", Proc. SPIE 4701, Smart Structures and Materials 2002: Smart Structures and Integrated Systems, (15 July 2002); https://doi.org/10.1117/12.474676

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available