Paper
1 August 1984 New Directional Coupler And Connecting Device For Fiber Optic Local Area Networks
P. A. Bulteel, J. Tillemans
Author Affiliations +
Proceedings Volume 0479, Fiber Optic Couplers, Connectors, and Splice Technology; (1984) https://doi.org/10.1117/12.942780
Event: 1984 Technical Symposium East, 1984, Arlington, United States
Abstract
A new directional coupler and fiber optic connecting device are presented. Both components combine high performance with low cost. The devices are designed for standard low loss 200 micron plastic clad silica (PCS) fiber. The paper describes the design of a new connecting device (LANsplice) which features low loss, small dimensions, ease of installation, visible connection and inspectability of insertion loss after assembly. Mean insertion loss is 0.3 dB, and the device can be remated many times. By using index matching gel, Fresnel reflections are strongly suppressed. The influence of connection loss on reflected power is discussed, and the results of environmental tests (temperature, humidity and shock) are presented. The fiber optic directional coupler (LANtap) features mean excess loss of 0.24 dB for 1:1 couplers and 0.15 dB for 3:1 and 10:1 couplers. The mode selectivity of fused couplers is sometimes indicated as a drawback, however better understanding of this effect leads to a simple rule of thumb to overcome this in local area networks. Measurement results on a bi-directional link on a single fiber and on a fail-safe LAN with passive optical bypass are discussed. It is shown that both designs are quite insensitive to variations of coupler parameters and to the mode selectivity of this coupler. Results of environmental tests are presented.
© (1984) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. A. Bulteel and J. Tillemans "New Directional Coupler And Connecting Device For Fiber Optic Local Area Networks", Proc. SPIE 0479, Fiber Optic Couplers, Connectors, and Splice Technology, (1 August 1984); https://doi.org/10.1117/12.942780
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Local area networks

Fiber optics

Reflectivity

Connectors

Directional couplers

Cladding

Signal attenuation

RELATED CONTENT

Fly-by-light optical bus interface module (OBIM)
Proceedings of SPIE (May 22 1995)
Datacommunication With Low Cost Plastic Fiber Optic Components
Proceedings of SPIE (September 17 1987)
Fiber-Optic Communication Technology Branching Devices
Proceedings of SPIE (February 12 1985)
Asymmetric Fiber Optic Coupler For LAN Applications
Proceedings of SPIE (January 14 1987)
Applications Of Plastic Optical Fiber To Local Area Networks
Proceedings of SPIE (December 14 1988)
Plastic fiber couplers using simple polishing techniques
Proceedings of SPIE (September 01 1991)

Back to Top