Paper
27 August 2003 Fast lens testing using random targets
Author Affiliations +
Abstract
The performance of a random target method for fast MTF measurement of a lens is evaluated. Although the method is well-known, its potential for fast lens testing has not been assessed in the open literature. To optimize speed, the simplest possible instrument setup with minimum amount of mechanical movements during measurement execution is used. The setup includes only a random target, lens under test and a CCD camera with focus adjustment. The target consists of a random black and white pattern of a flat spectrum. The MTF of the lens is acquired by imaging the random target on the CCD using the lens, and then analyzing the spatial frequency content of the image using an ordinary PC. It was found out that a suitable compromise between speed and precision is achieved using a matrix of 128*128 samples per measured field point. This provides better than 2% precision and a few second's total execution time per lens including best focus evaluation and the measurement of tangential and sagittal MTF curves of 5 field points. Using commercially available components, measurement frequencies up to 100 cycles/mm seem achievable using the simple instrument setup.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sampo Backman, Anssi Jaakko Maekynen, Timo T. Kolehmainen, and Kai M. Ojala "Fast lens testing using random targets", Proc. SPIE 4876, Opto-Ireland 2002: Optics and Photonics Technologies and Applications, (27 August 2003); https://doi.org/10.1117/12.463918
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Sensors

Charge-coupled devices

Spatial frequencies

CCD cameras

Optical filters

Cameras

RELATED CONTENT


Back to Top