Paper
3 April 2003 Optical surface analysis: a new technique for the inspection and metrology of optoelectronic films and wafers
Laurie Bechtler, Vamsi Velidandla
Author Affiliations +
Abstract
In response to demand for higher volumes and greater product capability, integrated optoelectronic device processing is rapidly increasing in complexity, benefiting from techniques developed for conventional silicon integrated circuit processing. The needs for high product yield and low manufacturing cost are also similar to the silicon wafer processing industry. This paper discusses the design and use of an automated inspection instrument called the Optical Surface Analyzer (OSA) to evaluate two critical production issues in optoelectronic device manufacturing: (1) film thickness uniformity, and (2) defectivity at various process steps. The OSA measurement instrument is better suited to photonics process development than most equipment developed for conventional silicon wafer processing in two important ways: it can handle both transparent and opaque substrates (unlike most inspection and metrology tools), and it is a full-wafer inspection method that captures defects and film variations over the entire substrate surface (unlike most film thickness measurement tools). Measurement examples will be provided in the paper for a variety of films and substrates used for optoelectronics manufacturing.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Laurie Bechtler and Vamsi Velidandla "Optical surface analysis: a new technique for the inspection and metrology of optoelectronic films and wafers", Proc. SPIE 4944, Integrated Optical Devices: Fabrication and Testing, (3 April 2003); https://doi.org/10.1117/12.468295
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Sensors

Inspection

Signal detection

Phase shifts

Silicon

Metrology

RELATED CONTENT

Step And Repeat Wafer Imaging
Proceedings of SPIE (September 05 1980)
Development Of Sem-Based Dedicated Ic Metrology System
Proceedings of SPIE (October 15 1984)
Use of light scatter signals to identify particle material
Proceedings of SPIE (December 10 2001)

Back to Top