Influence of optical gaps on signal and noise properties of luminescent screen x-ray detectors

Andreas Koch

doi:10.1117/12.537288

6 May 2004 Influence of optical gaps on signal and noise properties of luminescent screen x-ray detectors

Andreas Koch

Proceedings Volume 5368, Medical Imaging 2004: Physics of Medical Imaging; (2004) https://doi.org/10.1117/12.537288
Event: Medical Imaging 2004, 2004, San Diego, California, United States

Abstract

X-ray detection with luminescent screens requires optical signal transfer as an intermediate step between x-ray detection and conversion to an electronic signal. Luminescent screens may be granular (phosphor screens), structured (e.g. CsI) or transparent (scintillators). The optical signal is imaged with lenses, fibre optics, electron optics or by proximity focussing to an electronic detector. Poor focussing or poor optical contact may degrade the signal and noise transfer characteristics, i.e. modulation transfer function (MTF) and detective quantum efficiency (DQE). The case when x-rays are detected with granular luminescent screens, imaged onto flat panel electronic detectors is considered here. The detector assembly often requires layers of glue or protective thin films creating optical gaps, in which light is spread, hence spatial resolution is degraded. The noise spectrum is not necessarily changed the same way. Its exact shape depends on the dominant noise sources in a given detector configuration under the specific operating conditions: The noise of the primary x-ray quanta, noise aliasing and direct x-ray detection by the electronic detection layer are the main contributions in this investigation. Especially at high spatial frequencies small optical gaps in conjunction with white quantum noise from direct x-ray absorption of the electronic imager degrade DQE: A gap of 40 μm between luminescent screen and detector reduces the DQE by 33% at the Nyquist frequency. This was demonstrated with an a-Si imager of 143-μm pixel size and a Lanex Fine luminescent screen operated at 100 kV.

Citation Download Citation

Andreas Koch "Influence of optical gaps on signal and noise properties of luminescent screen x-ray detectors", Proc. SPIE 5368, Medical Imaging 2004: Physics of Medical Imaging, (6 May 2004); https://doi.org/10.1117/12.537288

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available