Preliminary results of EB stepper in the application of 65-nm process

Hiroshi Takenaka; Kaoru Koike; Takahiro Tsuchida; Fumihiro Koba; Hiroshi Sakaue; Masaki Yamabe

doi:10.1117/12.534875

20 May 2004 Preliminary results of EB stepper in the application of 65-nm process

Hiroshi Takenaka, Kaoru Koike, Takahiro Tsuchida, Fumihiro Koba, Hiroshi Sakaue, Masaki Yamabe

Proceedings Volume 5374, Emerging Lithographic Technologies VIII; (2004) https://doi.org/10.1117/12.534875
Event: Microlithography 2004, 2004, Santa Clara, California, United States

Abstract

Electron projection lithography (EPL) is a promising candidate for next-generation lithography (NGL) at the 65 nm technology node and beyond. Nikon has developed the world's first full-field EPL exposure tool, Nikon's NSR-EB1A. This tool was shipped to Selete in June 2003. Final installation is still in progress, but we have begun evaluating its applicability to the 65 nm technology node through trial fabrication of a test element group (TEG). A TEG of via-hole chains consisting of 1st metal, 1st via, and 2nd metal layers was fabricated using optical/EPL mix-and-match lithography. We applied EPL to the via layer. The purpose of the first fabrication is to clarify practical hole resolution of the EPL tool because EPL is expected to define finer hole patterns and enable denser integration than optical lithography. To prevent defects in metal layers from adversely affecting evaluation, we used moderate pattern layouts in metal layers. Metal layers were defined by an ArF scanner to obtain good pattern fidelity and sufficient pattern yield. We used a single damascene process with a low-k insulator and Cu interconnection. Practical hole resolution was evaluated by electrical measurement and SEM and TEM observation. SEM confirmed that via holes of 70 nm were resolved. TEM confirmed that via-hole chains of 80 nm were fabricated. Electrical measurement confirmed electrical conduction through via-hole chains of 75 nm. These results suggest that applying EPL to hole layers could realize denser integration than optical lithography. EPL application to TEG trial fabrication demonstrates its high-resolution capability in practical use.

Citation Download Citation

Hiroshi Takenaka, Kaoru Koike, Takahiro Tsuchida, Fumihiro Koba, Hiroshi Sakaue, and Masaki Yamabe "Preliminary results of EB stepper in the application of 65-nm process", Proc. SPIE 5374, Emerging Lithographic Technologies VIII, (20 May 2004); https://doi.org/10.1117/12.534875

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available