Paper
30 August 2004 Wide field of view infrared imaging system design
Author Affiliations +
Abstract
In the design of optical systems, simple straightforward requirements are often complicated by unusual and unique constraints. In this particular case a design mapping a 20° square field of view onto a CCD sensor is complicated by the requirement that the wide field of view must not vignette through a narrow-diameter, finite-length cylindrical aperture. Furthermore, the design must use off-the-shelf optics available from any major vendor. The imaging system is designed to operate in the near IR. The 20° square field of view must pass through a 20.32mm diameter, 40mm long cylindrical tube without vignetting. This constraint prohibits the use of a simple achromat whose back focal length would place the image within the cylindrical tube. Two design approaches are discussed, a Keplerian telescope with a field lens, and a reverse telephoto system. Matlab programs have been written that evaluate the first-order optical principles to arrive at a design solution space. Representative solutions are then evaluated in Zemax using the built-in lens catalog to select appropriate lenses. The results show the advantages and limitations of each particular design approach.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eric W. Rogala "Wide field of view infrared imaging system design", Proc. SPIE 5406, Infrared Technology and Applications XXX, (30 August 2004); https://doi.org/10.1117/12.542444
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zemax

Information operations

Monochromatic aberrations

Imaging systems

Distortion

Infrared imaging

MATLAB

Back to Top