Paper
1 September 2004 Fabrication, optimization, and characterization of monolithic semiconductor mode-locked lasers and colliding, pulse mode-locked lasers at millimeter-wave frequencies
Author Affiliations +
Abstract
This work reports on the fabrication, optimisation and characterisation of monolithic mode-locked lasers (MLLs) and colliding-pulse mode-locked (CPM) lasers with repetition rate in the range 10-60 GHz. The devices consist of double section split-contact ridge waveguide lasers fabricated in GaAs/AlGaAs double quantum well (DQW) material. For CPM devices, the saturable absorber section was fabricated with a coplanar ground-signal-ground (G-S-G) pad structure. The optimum saturable absorber size for efficient mode-locking is found experimentally. The fabricated devices are characterised in terms of operating regimes (Continuous Wave, Self-Pulsation, Mode-Locking) and the mode-locking signals were observed in the frequency domain using an external fast photodiode. In the case of CPM devices a mm-wave signal could also be extracted directly from the saturable absorber section of the laser using a microwave probe.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marco Passerini, Marc Sorel, Peter J.R. Laybourn, Guido Giuliani, and Silvano Donati "Fabrication, optimization, and characterization of monolithic semiconductor mode-locked lasers and colliding, pulse mode-locked lasers at millimeter-wave frequencies", Proc. SPIE 5466, Microwave and Terahertz Photonics, (1 September 2004); https://doi.org/10.1117/12.545801
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mode locking

Semiconductor lasers

Photodiodes

Surface plasmons

Pulsed laser operation

Continuous wave operation

Microwave radiation

RELATED CONTENT


Back to Top