Calibration methodology for the airborne dispersive pushbroom imaging spectrometer (APEX)

Jens Nieke; Johannes W. Kaiser; Daniel Schlaepfer; Jason Brazile; Klaus I. Itten; Peter Strobl; Michael E. Schaepman; Gerd Joachim Ulbrich

doi:10.1117/12.566364

4 November 2004 Calibration methodology for the airborne dispersive pushbroom imaging spectrometer (APEX)

Jens Nieke, Johannes W. Kaiser, Daniel Schlaepfer, Jason Brazile, Klaus I. Itten, Peter Strobl, Michael E. Schaepman, Gerd Joachim Ulbrich

Author Affiliations +

Proceedings Volume 5570, Sensors, Systems, and Next-Generation Satellites VIII; (2004) https://doi.org/10.1117/12.566364
Event: Remote Sensing, 2004, Maspalomas, Canary Islands, Spain

Abstract

APEX is a dispersive pushbroom imaging spectrometer operating in the spectral range between 380 - 2500 nm. The spectral resolution will be better than 10 nm in the SWIR and < 5 nm in the VNIR range of the solar reflected range of the spectrum. The total FOV will be ± 14 deg, recording 1000 pixels across track with about 300 spectral bands simultaneously. A large variety of characterization measurements will be performed in the scope of the APEX project, e.g., on-board characterization, frequent laboratory characterization, and vicarious calibration. The retrieved calibration parameters will allow a data calibration in the APEX Processing and Archiving Facility (PAF). The data calibration includes the calculation of the required, time-dependent calibration coefficients from the calibration parameters and, subsequently, the radiometric, spectral and geometric calibration of the raw data. Because of the heterogeneity of the characterization measurements, the optimal calibration for each data set is achieved using a special assimilation algorithm. In the paper the different facilities allowing characterization measurements, the PAF and the new data assimilation scheme are outlined.

Citation Download Citation

Jens Nieke, Johannes W. Kaiser, Daniel Schlaepfer, Jason Brazile, Klaus I. Itten, Peter Strobl, Michael E. Schaepman, and Gerd Joachim Ulbrich "Calibration methodology for the airborne dispersive pushbroom imaging spectrometer (APEX)", Proc. SPIE 5570, Sensors, Systems, and Next-Generation Satellites VIII, (4 November 2004); https://doi.org/10.1117/12.566364

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available