Light-activated shape memory polymers and associated applications

Ernie Havens; Emily A. Snyder; Tat Hung Tong

doi:10.1117/12.606109

5 May 2005 Light-activated shape memory polymers and associated applications

Ernie Havens, Emily A. Snyder, Tat Hung Tong

Proceedings Volume 5762, Smart Structures and Materials 2005: Industrial and Commercial Applications of Smart Structures Technologies; (2005) https://doi.org/10.1117/12.606109
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2005, San Diego, California, United States

Abstract

Continuous product development and technology integration efforts using shape memory polymers (SMPs) have uncovered a need for faster response times. As with most smart materials, SMP responds to a specific stimulus. Traditionally SMP is triggered by thermal stimulus; increasing the temperature of the SMP above a Tg will transition the polymer from a glassy state to a rubbery state. The transition is reversible upon cooling below the Tg. It has been determined that many SMP applications can be significantly enhanced with non-thermal triggering. Non-thermal triggering eliminates the need for heating mechanisms and reduces cycle time. Furthermore, it has been found that with a faster response time many new applications become viable. Previous successful attempts have been made to improve response time of SMP by increasing its thermal conductivity with various thermally conductive additives1. However, thermal heating and cooling of polymers and composites of substantial thickness, thermally conductive or not, takes time. In an effort to facilitate system integration and increase the response time of SMP, researchers at Cornerstone Research Group, Inc. (CRG) have sought to eliminate the thermal dependency of SMP by developing light-activated shape memory polymer (LASMP). In this work, monomers which contain photo-crosslinkable groups in addition to the primary polymerizable groups were developed. These monomers were formulated and cured with other monomers to form LASMP. The mechanical properties of these materials, the kinetics, and the reversibility of the light-activated shape memory effect were studied. The near-, mid-, and far-term potential of this new material technology for system level applications is discussed.

Citation Download Citation

Ernie Havens, Emily A. Snyder, and Tat Hung Tong "Light-activated shape memory polymers and associated applications", Proc. SPIE 5762, Smart Structures and Materials 2005: Industrial and Commercial Applications of Smart Structures Technologies, (5 May 2005); https://doi.org/10.1117/12.606109

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available