Paper
23 March 2005 Development of a rational design procedure for a pressure recovery system for HPCL
Sehoon Kim, Jungkun Jin, Hyuckmo Kwon, Sejin Kwon
Author Affiliations +
Proceedings Volume 5777, XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; (2005) https://doi.org/10.1117/12.610987
Event: XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2004, Prague, Czech Republic
Abstract
From the geometric parameter study, an optimal ejector design procedure of pressure recovery system for chemical lasers was acquired. For given primary flow reservoir conditions, an up-scaled ejector was designed and manufactured. In the performance test, secondary mass flow rate of 200g/s air was entrained satisfying the design secondary pressure, 40 ~ 50torr. Performance validation of a supersonic ejector system along with an investigation of effects of supersonic diffuser was conducted. Placement of the diffuser at the secondary inlet further reduced diffuser upstream pressure to 7torr. Lastly, the duplicate of apparatus (air 100 g/s secondary mass flow rate each) was built and connected in parallel to assess proportionality behavior on a system to handle larger mass flow rate. Test and comparison of the parallel unit demonstrated the secondary mass flow rate was proportional to the number of individual units that were brought together maintaining the lasing pressure.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sehoon Kim, Jungkun Jin, Hyuckmo Kwon, and Sejin Kwon "Development of a rational design procedure for a pressure recovery system for HPCL", Proc. SPIE 5777, XV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, (23 March 2005); https://doi.org/10.1117/12.610987
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffusers

Chemical lasers

High power lasers

Laser systems engineering

Gas lasers

Manufacturing

Design for manufacturability

Back to Top