Paper
29 August 2005 Comparison of infrared laser beam shaping by diffractive and refractive methods
Author Affiliations +
Abstract
Infra-red laser beam shaping has the inherent difficulty that simple ray tracing methods often yield anomalous results, due primarily to the propagation effects at longer wavelengths. Techniques based on diffraction theory have been developed to overcome this, with associated parameters to determine when one approach is needed versus another. In this paper, infra-red (IR) beam shaping by diffractive methods is investigated and compared to refractive methods. Theoretical results on the beam shapers are calculated through a combination of analytical and numerical techniques, and using both ideal and non-ideal inputs. We show that the diffractive optical element (DOE) is remarkably resilient to input errors of wavelength and beam quality, while the refractive shaper is found to be difficult to model. Optical elements based on the two approaches were designed, and then fabricated from ZnSe. A comparison between the fabricated elements and the designed elements is presented, and some of the findings on practical problems in having such elements fabricated are highlighted.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew Forbes, Anton du Plessis, and Erich G. Rohwer "Comparison of infrared laser beam shaping by diffractive and refractive methods", Proc. SPIE 5876, Laser Beam Shaping VI, 58760H (29 August 2005); https://doi.org/10.1117/12.616654
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Beam shaping

Diffractive optical elements

Gas lasers

Transmission electron microscopy

Gaussian beams

Laser beam propagation

Refractive index

RELATED CONTENT

Wavefront and caustic surfaces of refractive laser beam shaper
Proceedings of SPIE (September 14 2007)
Graded-index design in coherent beam shaping
Proceedings of SPIE (October 15 2012)
Historical perspective of laser beam shaping
Proceedings of SPIE (October 24 2002)
Wavelength-independent laser beam shaping
Proceedings of SPIE (August 16 2010)
Tolerancing and analysis of a diffractive beam shaper
Proceedings of SPIE (February 16 2010)

Back to Top