Development of fabrication process for shape-control of three-dimensional submicron structure by synchrotron radiation lithography

S. Fujinawa; F. Kato; S. Sugiyama

doi:10.1117/12.638569

3 January 2006 Development of fabrication process for shape-control of three-dimensional submicron structure by synchrotron radiation lithography

S. Fujinawa, F. Kato, S. Sugiyama

Author Affiliations +

Proceedings Volume 6037, Device and Process Technologies for Microelectronics, MEMS, and Photonics IV; 603717 (2006) https://doi.org/10.1117/12.638569
Event: Microelectronics, MEMS, and Nanotechnology, 2005, Brisbane, Australia

Abstract

The 3D structural shape-control using Synchrotron Radiation (SR) lithography for the configurations of less than a micron-size has been realized. The fabrication process will be described in details. Moreover, the structure with aspect ratio as high as 4 was achieved. The briefly introduced fabrication process is to deposit a PMMA (polymethylmethacrylate) layer to a silicon substrate by spin coating. The layer is used as the X-ray resist. Subsequently, to expose SR onto the resist through an X-ray mask, then to develop the exposed resist. The principal shape-control is accomplished by optimizing each parameter influencing the resist formation, the exposed SR dosage, and development time. All mentioned above are the parameters determined from the fabrication of an arbitrary shape which is the main purpose in this paper. The targeted evaluation of the fabricated structures is to provide the line and space of 1μm pitch, 1.9μm line-height, and aspect ratio of 4. The technique for optimization of the experimental condition and each parameter for the fabrication process will be explained in the paper. This research is expected to be useful for other related work on manufactures of sub-micron structure. The suggested applications are; a variety of optical elements such as the polarized light beam splitters, diffraction optical elements, and a number of applications in device or system which requires nanoscale structures will find this work employable. The fabrication technique of higher aspect ratio and narrower line-width will be investigated in the future research.

Citation Download Citation

S. Fujinawa, F. Kato, and S. Sugiyama "Development of fabrication process for shape-control of three-dimensional submicron structure by synchrotron radiation lithography", Proc. SPIE 6037, Device and Process Technologies for Microelectronics, MEMS, and Photonics IV, 603717 (3 January 2006); https://doi.org/10.1117/12.638569

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available