Critical dimension AFM tip characterization and image reconstruction applied to the 45-nm node

Gregory Dahlen; Marc Osborn; Hao-Chih Liu; Rohit Jain; William Foreman; Jason R. Osborne

doi:10.1117/12.656848

24 March 2006 Critical dimension AFM tip characterization and image reconstruction applied to the 45-nm node

Gregory Dahlen, Marc Osborn, Hao-Chih Liu, Rohit Jain, William Foreman, Jason R. Osborne

Proceedings Volume 6152, Metrology, Inspection, and Process Control for Microlithography XX; 61522R (2006) https://doi.org/10.1117/12.656848
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

Three significant critical dimension atomic force microscopy (CD AFM) advances are presented in this paper. First, scanning probe image reconstruction methodologies that were formerly limited to parabolic type tip shapes and single-valued surfaces (i.e., non-reentrant topography), are extended to multi-valued surfaces and reentrant tip geometries. This crucial step allows the elimination of image artifacts associated with CD AFM scanning of complex feature shapes using reentrant tips. Second, in situ AFM tip images are provided in an automated tool that enables full image reconstruction. Consequently, for the first time, the combination of in situ tip reconstruction with the inherent reference measurement qualities of the AFM and full morphology reconstruction allow CD AFM metrology essentially free of tip shape effects. CD AFM is now primarily driven by development of tip geometries that contact the entire specimen surface while retaining adequate tip lifetime. The background of CD AFM image dilation is described, and the limitations of "legacy" 1D image reconstruction ("tip width subtraction") are illustrated with idealized probe shapes. Initial validation of the automated software is provided by comparison with TEM micrographs. Tip characterizations are presented for a morphologically complex ~20 nm diameter carbon nanotube tip and reentrant silicon CD32 tips (tip width ~ 30nm). Finally, the capability for CD AFM to scan a reentrant sub-45 nm width trench is demonstrated. An EUV resist trench was scanned with a CD32 tip (tip width = 27.4 nm). Minimum CD ranged from 42 to 45 nm. Reentrant image reconstruction is shown for the scan cross-section.

Citation Download Citation

Gregory Dahlen, Marc Osborn, Hao-Chih Liu, Rohit Jain, William Foreman, and Jason R. Osborne "Critical dimension AFM tip characterization and image reconstruction applied to the 45-nm node", Proc. SPIE 6152, Metrology, Inspection, and Process Control for Microlithography XX, 61522R (24 March 2006); https://doi.org/10.1117/12.656848

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available