Paper
21 September 2006 A new I-V model for light emitting devices with a quantum well
Chin C. Lee, Winnie Chen, Jeong Park
Author Affiliations +
Proceedings Volume 6355, Advanced LEDs for Solid State Lighting; 63550V (2006) https://doi.org/10.1117/12.691773
Event: Asia-Pacific Optical Communications, 2006, Gwangju, South Korea
Abstract
This paper reports a new model of current versus voltage for light emitting devices with a quantum well. These devices include light emitting diodes (LEDs) and laser diodes (LDs). In LED or LD operation, nearly all electrons and holes are injected into the quantum well and recombine there. As a result, the forward current consists of mainly the recombination current. This is in contrast to the popular Sah-Noyce-Shockley (SNS) diode equation where the dominating current is the diffusion current. The SNS model assumes that recombination in the depletion region is negligible under typical forward bias condition. This is opposite to what actually happens in LEDs or LDs with quantum wells. However, SNS equation has been used directly to describe LEDs and LDs with quantum wells for several decades probably because of its simplicity. Another probably reason is that there is no other I-V model available. In this study, I-V curves calculated using the new model agree well with results measured on GaN/sapphire LEDs with InGaN quantum wells. In the calculation, junction temperature Tj rather than case temperature Tc is used to achieve better agreement.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chin C. Lee, Winnie Chen, and Jeong Park "A new I-V model for light emitting devices with a quantum well", Proc. SPIE 6355, Advanced LEDs for Solid State Lighting, 63550V (21 September 2006); https://doi.org/10.1117/12.691773
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Quantum wells

Light emitting diodes

Electrons

Diodes

Diffusion

Instrument modeling

Bismuth

Back to Top