Tri-layer conducting polymer actuators with variable dimensions

Rick Minato; Gürsel Alici; Scott McGovern; Geoffrey Spinks

doi:10.1117/12.715456

5 April 2007 Tri-layer conducting polymer actuators with variable dimensions

Rick Minato, Gürsel Alici, Scott McGovern, Geoffrey Spinks

Proceedings Volume 6524, Electroactive Polymer Actuators and Devices (EAPAD) 2007; 65241J (2007) https://doi.org/10.1117/12.715456
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2007, San Diego, California, United States

Abstract

The ability of conducting polymer actuators to convert electrical energy into mechanical energy is influenced by many factors ranging from the actuators physical dimensions to the chemical structure of the conducting polymer. In order to utilise these actuators to their full potential, it is necessary to explore and quantify the effect of such factors on the overall actuator performance. The aim of this study is to investigate the effect of various geometrical characteristics such as the actuator width and thickness on the performance of tri-layer polypyrrole (PPy) actuators operating in air, as opposed to their predecessors operating in an appropriate electrolyte. For a constant actuator length, the influence of the actuator width is examined for a uniform thickness geometry. Following this study, the influence of a varied thickness geometry is examined for the optimised actuator width. The performance of the actuators is quantified by examination of the force output, tip displacement, efficiency as a function of electrical power and mechanical power, and time constant for each actuator geometry. It was found that a width of 4mm gave the greatest overall performance without curling along the actuator length (which occurred with widths above 4mm). This curling phenomenon increased the rigidity of the actuator, significantly lowering the displacement for low loads. Furthermore, it was discovered that by focussing a higher thickness of PPy material in certain regions of the actuators length, greater performances in various domains could be achieved. The experimental results obtained set the foundation for us to synthesize PPy actuators with an optimised geometry, allowing their performance to reach full potential for many cutting applications.

Citation Download Citation

Rick Minato, Gürsel Alici, Scott McGovern, and Geoffrey Spinks "Tri-layer conducting polymer actuators with variable dimensions", Proc. SPIE 6524, Electroactive Polymer Actuators and Devices (EAPAD) 2007, 65241J (5 April 2007); https://doi.org/10.1117/12.715456

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available