Paper
5 March 2007 Self-sensing concrete-filled FRP tube using FBG strain sensor
Author Affiliations +
Proceedings Volume 6595, Fundamental Problems of Optoelectronics and Microelectronics III; 65953I (2007) https://doi.org/10.1117/12.725928
Event: Fundamental Problems of Optoelectronics and Microelectronics III, 2006, Harbin, China
Abstract
Concrete-filled fiber-reinforced polymer (FRP) tube is a type of newly developed structural column. It behaves brittle failure at its peak strength, and so the health monitoring on the hoop strain of the FRP tube is essential for the life cycle safety of the structure. Herein, the optic fiber Bragg grating (FBG) strain sensor was chosen as the strain measuring gauge and embedded in the inter-ply of fibers in the middle height and the hoop direction of the FRP tube. The compressive behaviors of the concrete-filled FRP tubes were experimentally studied. The hoop strain of the FRP tube was recorded in real time using the embedded FBG strain sensor as well as the embedded or surface electric resistance strain gauges. Results indicated that the FBG strain sensor can faithfully record the hoop strain ofthe concrete-filled FRP tubes in compression as compared with the embedded or surface electric resistance strain gauges, and the strain recorded can reach more than 7000με.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xin Yan and Hui Li "Self-sensing concrete-filled FRP tube using FBG strain sensor", Proc. SPIE 6595, Fundamental Problems of Optoelectronics and Microelectronics III, 65953I (5 March 2007); https://doi.org/10.1117/12.725928
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Fiber reinforced polymers

Sensors

Resistance

Refraction

Safety

Civil engineering

Back to Top