Paper
22 April 2008 Optical and laser characterization of 2% Nd:YAG ceramics elements
Zdzislaw Librant, Helena Węglarz, Anna Wajler, Henryk Tomaszewski, Tadeusz Łukasiewicz, Jan K. Jabczyński, Waldemar Zendzian, Jacek Kwiatkowski
Author Affiliations +
Abstract
We report on the first, promising production of Nd:YAG ceramics made in Poland. The Nd:YAG ceramics was produced by a solid-state reaction of high-purity (4N) nanometric oxides powders i.e. Al2O3, Y2O3 and Nd2O3. After sintering process mean grain sizes of 2%Nd:YAG samples were about 20 μm and transparency of its were comparable to 0.9% Nd:YAG single crystal. Two types of active elements: rods and slabs were fabricated and characterized in several diode pumping schemes. In end pumping configuration as a pump source 20-W fiber coupled laser diode operating in low duty cycle regime (1 ms pump duration /20 Hz) was deployed. In the best case, 3.7 W of output power for 18 W of absorbed pump power, M2 <1.4 were demonstrated for uncoated ceramics Nd:YAG rod of φ4x3mm size in preliminary experiments. For the ceramics of two times lower Nd dopant level above 30% slope efficiency was achieved. In case of slab ceramic side pumped by 600-W laser diode stack above 12 W was demonstrated with slope efficiency of 3.5%.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zdzislaw Librant, Helena Węglarz, Anna Wajler, Henryk Tomaszewski, Tadeusz Łukasiewicz, Jan K. Jabczyński, Waldemar Zendzian, and Jacek Kwiatkowski "Optical and laser characterization of 2% Nd:YAG ceramics elements", Proc. SPIE 6998, Solid State Lasers and Amplifiers III, 69981A (22 April 2008); https://doi.org/10.1117/12.780518
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ceramics

Nd:YAG lasers

Crystals

Semiconductor lasers

Laser optics

Neodymium

Diodes

RELATED CONTENT


Back to Top