Paper
16 February 2009 Preparation and characterization of phosphorescence organic light emitting diodes using PVK:Ir(ppy)3 emission layer
Hak Min Lee, Su Cheol Gong, Ji Geun Chang, Sang Ouk Ryu, Myoung Sun Gong, Jun Yeop Lee, Young Chul Chang, Ho Jung Chang
Author Affiliations +
Abstract
The phosphorescence polymer LEDs (PhPLEDs) with the structure of ITO/PEDOT:PSS/PVK:Ir(ppy)3/TPBI/LiF/Al were fabricated and investigated on the electrical and optical properties at variations doping concentrations (0.5wt% to 2.5wt%) of Ir(ppy)3. PVK(poly-vinylcarbazole) and Ir(ppy)3[tris(2-phenylpyridine)iridium(III)] polymers were used as the host and guest materials for the emission layer. TPBI was introduced to improve the light efficiency of the devices. The maximum luminance and current density for PhPLED were about 8600 cd/m2 and 155 mA/cm2 at 7 V, when the TPBI layer was introduced between emission and cathode electrode film. The emission spectrum and the CIE color coordinator were about 512nm and x, y = 0.28, 0.63, respectively, showing green color.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hak Min Lee, Su Cheol Gong, Ji Geun Chang, Sang Ouk Ryu, Myoung Sun Gong, Jun Yeop Lee, Young Chul Chang, and Ho Jung Chang "Preparation and characterization of phosphorescence organic light emitting diodes using PVK:Ir(ppy)3 emission layer", Proc. SPIE 7213, Organic Photonic Materials and Devices XI, 72131B (16 February 2009); https://doi.org/10.1117/12.808331
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Organic light emitting diodes

Phosphorescence

Energy transfer

Polymers

Absorption

Electrodes

Excitons

Back to Top